Pack Building

Potting vs Conformal Coating

Which protects a BMS board better, and when

By Arambhika · · 5 min read

Two-Part Silicone Potting Compound (1:1, Thermally Conductive Gel)
Featured product: Two-Part Silicone Potting Compound (1:1, Thermally Conductive Gel)

Moisture, dust and vibration kill BMS boards in the field. Two common defences are potting and conformal coating. They are not the same.

Side by side

Potting compoundConformal coating
FormFills the enclosure around the boardThin film on the board surface
Moisture and dustExcellentGood
VibrationExcellent, holds parts in placeLittle help
HeatA thermally conductive gel can move heat awayLittle effect
RepairDifficultEasier
Weight and costHigherLower

Our potting option

The two-part silicone potting compound stays soft, so it protects without stressing components. See the full potting guide.

Which to choose

Do not forget the BMS design

Whichever you use, keep connectors and the Bluetooth antenna area clear if you use a smart BMS; potting can affect signal and access.

General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.

Products in this guide

Silicone potting compound and BMS

Live stock and price from our store. Tap a product to add it to your quote.

Loading products…

View the full product store →

Frequently asked questions

Can I pot a BMS with a Bluetooth module?

Potting can reduce range and block access. Test first or keep the module area out of the pour.

Will potting make it waterproof?

It helps a lot, but the enclosure, cable entries and connectors also matter.

Is conformal coating enough for e-rickshaws?

Vibration and wet conditions often favour potting; the best choice depends on your design.

See all FAQs →