How-To
Build a 12.8V 60Ah 32140 Pack
4S4P layout: 16 cells, strip and BMS

Sixteen 32140 cells in a 4S4P layout make a 12.8 V, 60 Ah pack that fits a custom enclosure.
The maths
4 in series at 3.2 V is 12.8 V. 4 in parallel at 15 Ah is 60 Ah. Energy is 12.8 x 60 = 768 Wh. At 12.8 V, a 300 W load draws about 23 A.
Parts
- 16 cells from one batch: JSK 32140 ESS A-grade or CBAK 32140 EV
- Holders: 32650 holders if the size matches (check fit)
- Strip: pure 2P(32650) strip, or 47x0.30 mm for higher current
- BMS: Daly 4S hardware or a TDT 4S 40A
Steps
- Match cell voltages and group them in four sets of four.
- Weld each set in parallel with strip, using test welds first.
- Join the four sets in series with strip or busbar.
- Wire the BMS using the wiring guide.
- Insulate and test before use.
Notes
Spot-weld settings are in our LFP welding guide. Check the strip against your current with the sizing guide.
General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.
Products in this guide
Parts for a 32140 LFP pack
Live stock and price from our store. Tap a product to add it to your quote.
Loading products…
Frequently asked questions
Is 4S4P the same as 16 cells?
Yes. Four groups in series, each with four cells in parallel.
Will it run a 1000W inverter?
At 12.8 V that is about 78 A, which needs strong connections and a suitable BMS. Check cell ratings.
Can I add more cells later?
Not safely mixed with old cells. Design for the capacity you need up front.



%20with%20holder%2046.5x0.15%20mm%20CD%2034.5.jpeg?w=300)
%2046.5x0.3%20mm%20H%20Type.jpg?w=300)



