Nickel Strip
Fuse-Type Nickel Strip for 32650
A built-in weak link for each cell
%2036.5x0.15%20mm%20-%20Fuse%20Type%20CD%2022.5.jpeg)
In a parallel group, one shorted cell can dump the current of its neighbours into a fault. A fuse-type strip is a way to isolate that cell.
How it works
The strip has a narrowed section on the path to each cell. In normal use it carries the cell's current easily. If a cell goes into a short, the surge heats the narrow part until it opens, disconnecting that cell from the group.
The options
What it does not do
- It does not replace the BMS or the main fuse.
- It does not stop an external short; that is the main fuse's job.
- It does not protect against over-charge or over-discharge.
Using it well
Choose a fuse strip whose narrow section carries the per-cell normal current with margin. Keep welds consistent so the narrow part, not the weld, is the weak point. Read the strip type guide and the 32140 guide.
General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.
Products in this guide
Fuse-type nickel strip
Live stock and price from our store. Tap a product to add it to your quote.
Loading products…
Frequently asked questions
What size fuse is the narrow section?
The rating depends on the design. Ask us for the details if your application is critical.
Is fuse type needed in every pack?
It is an extra safety layer, most useful in large parallel groups.
Does it change the weld process?
No, but keep weld spots away from the narrow section.
%2036.5x0.15%20mm%20-%20Fuse%20Type%20CD%2022.5.jpeg?w=300)
%2036.5x0.15%20mm%20-%20Fuse%20Type%20CD%2022.5.jpeg?w=300)

%20%2046.5x0.30%20mm%20CD%2032.8%20without%20holder%20without%20slit.jpeg?w=300)
%20-%20Tin%20Coated.jpeg?w=300)