BMS Guide
BMS for Electric Bicycles
36V, 48V and 52V packs matched to a board

E-bikes use three common pack sizes. Each has a matching series count, and the right BMS follows from it.
Pack and BMS
| Pack | Series | Example board |
|---|---|---|
| 36 V | 10S | JBD NMC 10S 20A |
| 48 V | 13S | Daly NMC 13S 40A smart |
| 52 V | 14S | Daly NMC 14S 60A hardware |
Read your controller
The controller label or manual gives a battery current limit. Choose a BMS whose continuous rating is at or above it, and whose cutoff voltages match the pack. For 36 V packs that limit is often 15 A to 20 A; for 48 V and 52 V packs it is commonly 25 A to 40 A.
Hardware or smart?
A hardware board is cheapest and easy to fit. A smart one lets you see cell voltages over Bluetooth, which helps when range drops. See the 13S guide.
Cells
Use matched cells such as the Norda 18650 or DMEGC 21700, joined with nickel strip.
General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.
Products in this guide
BMS boards for e-bike batteries
Live stock and price from our store. Tap a product to add it to your quote.
Loading products…
Frequently asked questions
What is a 14S pack in volts?
About 51.8 V nominal and 58.8 V fully charged, sold as a 52 V pack.
Can the BMS be smaller than the controller limit?
No. A BMS rated below the controller current will trip under load.
Where do I fit the BMS in a frame battery?
Keep it where air can reach it and away from the cells it could heat.




.png?w=300)

