Pack Building
Battery Pack Bill of Materials
A checklist of every part, from cells to potting

Forgetting one small part stalls a build. Use this checklist to gather everything before you start.
1. Cells
Choose by chemistry and size: NMC 21700 or 18650 for cylindrical packs, LFP 32140 for round LFP, or prismatic LFP for storage and vehicles. Always buy a full pack's worth from one batch.
2. Connections
- Spot-welded cylindrical packs: plated strip or pure nickel strip
- Prismatic packs: copper busbar or aluminium busbar
3. Structure
Cell holders for cylindrical cells, plus an enclosure that suits your product.
4. Protection
A BMS matched to chemistry, series count and current, plus a main fuse or breaker sized to the load.
5. Insulation and sealing
Epoxy sheet for barriers and base plates, and potting compound for electronics that face water or vibration.
6. Tools
- Spot welder for strip (not needed for bolted busbar)
- Torque wrench for busbar bolts
- Multimeter, balance charger or tester
- Insulated tools, gloves and eye protection
Order it together
Most of these parts ship from our Noida warehouse in one order. Get a single quote on WhatsApp and see our supplier checklist.
General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.
Products in this guide
Core battery pack components
Live stock and price from our store. Tap a product to add it to your quote.
Loading products…
Frequently asked questions
Do I need a spot welder for every pack?
Only for strip-welded cylindrical packs. Prismatic cells use bolted or laser-welded busbar, so no spot welder is needed.
What is the part people forget most?
The main fuse and insulation. A BMS alone is not a replacement for a correctly rated fuse and clean insulation.
Can I buy everything from one place?
Yes. Cells, strip, busbar, holders, BMS, epoxy sheet and potting compound are all on our store.








