BMS Guide
TDT LFP BMS for Small Packs
Low-current boards for 6.4V to 25.6V LFP packs

Not every battery is for a vehicle. Lamps, speakers, solar lights and tools use small LFP packs, and TDT makes boards sized for them.
Pick by series count
- 2S (6.4 V): 2S 4A, for very small packs.
- 4S (12.8 V): 6A, 8A, 10A, 20A, 40A and 100
- 6S (19.2 V): 6S 10A
- 8S (25.6 V): 8S 30A
Sizing
Take the load in watts, divide by pack voltage, and add margin. A 100 W LED floodlight on 12.8 V draws about 8 A, so a 10A or 20A board fits. Our sizing guide has more examples.
Good uses
- Solar street lights and garden lamps
- Portable speakers and power stations
- Small UPS and router backups
Cells for small packs
Pair them with LFP cylindrical cells, for example the 32140 15Ah, joined with suitable strip.
General guidance only. Check cell, BMS and strip datasheets and the standards that apply to your product before you build or sell a pack.
Products in this guide
TDT LFP hardware BMS
Live stock and price from our store. Tap a product to add it to your quote.
Loading products…
Frequently asked questions
Do the colour variants (blue, green) differ?
They are different board versions. Ask us which suits your wiring if you are unsure.
Can a 4S board protect a 3S NMC pack?
No. Use a board made for the chemistry and cell count of your pack.
Are these good for e-bikes?
No. E-bike loads need higher-current boards such as the Daly or JBD ranges.

.png?w=300)

